Sound and Vibration Committee Meeting
September 8-9, 2010
Members of this committe must register for this free event.
Upcoming Events
September 14, 2010 | 8:00 am - 5:00 pm
Members of this committee must register for this event.
Gear Accuracy Committee Meeting
September 16, 2010 | 2:00 - 4:00 pm
Members of this committee must register for this event.
September 21-22, 2010 | Start Time: 9:30 am / Ajournment: 12:00 pm
Members of the Wormgearing Committee must register for this free event.
Helical Enclosed Drives High Speed Units Committee Meeting
September 21, 2010 | 10:00 am - 12:00 pm
Members of the Helical Enclosed High Speed Units Committee must register to attend this free event.
September 23, 2010 | 10:00 am - 12:00 pm Eastern
Members of the Bevel Gearing Committee must register for this free event.
Nomenclature Committee Meeting
September 28, 2010 | 11:00 am - 12:30 pm
Members of the Nomenclature Committee must register to attend this meeting.
Previous Event
Metallurgy and Materials Committee Meeting
October 28, 2009 | 10:00 am - 12:00 pm
Members of the Metallurgy and Materials Committee must register for this free event.
Photo by Ajax Rolled Ring and Machine, Inc.
Fine-Pitch Gearing Committee Meeting
November 12-13, 2009 | 8:30 am-12:00 pm
Members of the Fine-Pitch Gearing Committee must register for this free event.
Mill Gearing Committee Meeting
December 10, 2009 | 9:30 am - 1:30 pm
Members of the Mill Gearing Committee must register for this free event.
Photo by FLSmidth, Inc.
Wind Turbine Committee Meeting
December 15 - 16, 2009 | 8:30 am - 5:00 pm
Members of the Wind Turbine Gear Committee must register for this free event.
Photo by Powertrain Engineers, Inc.
Vehicle Gearing Committee Meeting
December 16, 2009 | 10:00 am - 12:00 pm
Members of the Vehicle Gearing Committee must register for this free event.
Photo by Twin Disc, Incorporated.
January 7, 2010 | 10:00 am - 12:00 pm
Among the items on this committee’s agenda is a new revision for ANSI/AGMA 6034-B92.
Marine Units Committee Meeting
January 19, 2010 | 9:30 - 11:00 am
The committee is working on the new revision of AGMA 6032-A94.
Photo by Twin Disc, Incorporated.
Aerospace Gearing Committee Meeting
January 25-26, 2010 | 9:00 am - 3:00 pm
The committee is working on development of AGMA 937-AXX.
Photo by Arrow Gear Co.
Technical Division Executive Committee Meeting
January 26, 2010 | 9:00 am - 5:00 pm
The committee will meet to discuss the regular business of the AGMA Technical Division and review the progress of the development of standards within the various committees.
Photo by AKGears, LLC.
Bevel Gearing Committee Meeting
January 27-28, 2010 | 9:00 am - 5:00 pm
The committee is reviewing ANSI/AGMA 2008-C01, among other activities.
Photo by Commercial Gear & Sprocket Co., Inc.
Sound & Vibration Committee Meeting
February 2, 2010 | 10:00 am - 12:00 pm
The committee will began work on new standard/technical sheet addressing condition monitoring and diagnostics.
Photo by Bonfiglioli USA, Inc.
Metallurgy and Materials Committee Meeting
February 2-3, 2010 | 11:00 am - 3:00 pm
This committee is developing the next version of AGMA 2007 “Gears – Surface Temper Etch Inspection after Grinding.”
Photo by Ajax Rolled Ring and Machine, Inc.
Mill Gearing Committee Meeting
February 3, 2010 | 9:30 am - 1:30 pm
Members of the Mill Gearing Committee must register for this free event.
Photo by FLSmidth, Inc.
Plastics Gearing Committee Meeting
February 8-9, 2010 | 1:00 pm - 4:00 pm
The Plastics Gearing Committee continues work on three standards.
Photo by Ticona Engineering Polymers.
Gear Accuracy Committee Meeting
February 10-11, 2010 | 8:30 am - 4:00 pm
Among the agenda items for this committee is developing the U.S. position on the revision of ISO 1328-1.
Photo by Columbia Gear Corp.
Helical Gear Rating Committee Meeting
February 17-18, 2010 | 8:00 am - 5:00 pm
The committee continues development of the next generation of AGMA 2101 (using 6336).
Photo by RotoMetrics.
Cutting Tools Committee Meeting
February 18-19, 2010 | 9:00 am - 1:00 pm
Among the agenda items of the Cutting Tools Committee is finalizing work on ANSI/AGMA 1104-A09.
Photo by Machine Tool Builders, Inc.
Powder Metallurgy Gearing Committee Meeting
February 23, 2010 | 10:00 am - 12:00 pm
Committee members plan to vote on a new chairman and vice chairman.
Photo courtesy of Capstan Atlantic.
Vehicle Gearing Committee Meeting
February 24, 2010 | 10:00 am - 12:00 pm
The committee plans to continue its work on AGMA 6002-CXX.
Photo by Twin Disc, Incorporated.
Nomenclature Committee Meeting
February 25, 2010 | 10:00 am - 11:30 am
The committee will be re-considering two standards and reviewing certain standards against ISO 10825.
Marine Units Committee Meeting
March 4, 2010 | 9:30 am - 11:00 am
The committee plans to continue finalization of the revision of AGMA 6032-A94.
Photo by Twin Disc, Incorporated.
Bevel Gearing Committee Meeting
March 9, 2010 | 11:00 am - 1:00 pm
This committee plans to discuss matters related to ISO Working Group 13.
Photo by Commercial Gear & Sprocket Co., Inc.
Computer Programming Committee Meeting
March 11, 2010 | 2:30 pm - 4:30 pm
Members of the Computer Programming Committee must register for this free event.
Photo by Schafer Gear Works.
Sound & Vibration Committee Meeting
March 16, 2010 | 10:00 am - 12:00 pm
Members of the Sound & Vibration Committee must register for this free teleconference.
Photo by Bonfiglioli USA, Inc.
Plastics Gearing Committee Meeting
March 30, 2010 | 10:00 am - 11:00 am
Members of the Plastics Gearing Committee must register for this free event.
Photo by Ticona Engineering Polymers.
Cutting Tools Committee Meeting
April 6, 2010 | 9:00 am - 11:00 am
Members of this committee must register for this free event.
Photo by Machine Tool Builders, Inc.
Metallurgy and Materials Committee Meeting
April 8, 2010 | 10:00 am - 11:30 am
Members of the Metallurgy and Materials Committee must register to attend this free event.
Photo by Ajax Rolled Ring and Machine, Inc.
Computer Programming Committee Meeting
April 8-10, 2010
The committee plans to conclude its work on Version III of the popular Gear Rating Suite software.
Photo by Schafer Gear Works.
Vehicle Gearing Committee Meeting
April 9, 2010 | 10:00 am - 12:00 pm
The committee continues to review AGMA 6002-CXX.
Photo by Twin Disc, Incorporated.
Sound & Vibration Committee Meeting
April 20, 2010 | 10:00 am - 12:00 pm
Members of the Sound & Vibration Committee must register for this free teleconference.
The committee members will continue their discussion on the new Information Sheet AGMA 919 “Condition monitoring and diagnostics of gear units.”
Photo by Bonfiglioli USA, Inc.
Fine-Pitch Gearing Committee Meeting
April 22-23, 2010 | Start time 8:30 am / Adjourn 12:00 pm
Members of the Fine-Pitch Gearing Committee must register for this free event.
This committee will continue work on AGMA 910-C90 and AGMA 916-AXX.
Marine Units Committee Meeting
April 27, 2010 | 8:00 am - 3:30 pm
Members of the Helical Enclosed Drives Marine Units Committee must register for this free event.
Photo by Twin Disc, Incorporated.
Flexible Couplings Committee Meeting
April 28-29, 2010 | 9:00 am - 5:00 pm
The committee plans to discuss and resolve the results of the ballot on AGMA 9110-DXX.
Photo by Rexnord.
May 4-5, 2010 | Tuesday starts 10:00 am / Wednesday ends at 12:00 pm
This committee is the U.S. Technical Advisory Group to the ISO Working Group 7.
Mill Gearing Committee Meeting
May 4-5, 2010 | Tuesday starts 8:30 am / Wednesday ends 3:30 pm
Members of this committee must register for this free event.
Photo by FLSmidth, Inc.
Nomenclature Committee Meeting
May 6, 2010 | 11:00 am - 12:30 pm
The committee plans to continue discussion on revising ANSI/AGMA 1010-E95, as well as reaffirmation of ANSI/AGMA 1012-G05.
Energy Efficiency Committee Meeting
May 7, 2010 | 4:30 pm
Members of this committee must register for this free event.
Metallurgy and Materials Committee Meeting
May 14, 2010 | 10:30 am - 12:00 pm
Members of the Metallurgy and Materials Committee must register to attend this free event.
Photo by Ajax Rolled Ring and Machine, Inc.
Vehicle Gearing Committee Meeting
May 18, 2010 | 12:00 pm
Members of this committee must register for this free event.
Photo by Twin Disc, Incorporated
Helical Gear Rating Committee Meeting
May 18 - 19, 2010
Members of this group must register for this free event.
Photo by RotoMetrics
Technical Division Executive Committee Meeting
May 20-21, 2010 | 1:00 pm
Members of the TDEC committee must register for this free event.
Photo by AKGears, LLC.
Aerospace Gearing Committee Meeting
May 24 - 25, 2010 | Start Time: 9:00 am / Adjournment 3:00 pm
Members of the Aerospace Gearing Committee must register for this free event.
Photo by Arrow Gear Co.
Sound & Vibration Committee Meeting
May 25, 2010 | 10:00 am - 12:00 pm
Member of the Sound & Vibration committee must register for this free event.
Photo by Bonfiglioli USA, Inc.
Helical Enclosed Drives Marine Units Committee Meeting
June 8, 2010 | 9:30 am - 12:00 pm
Members of the Helical Enclosed Drives High Speed Units Committee must register to attend this free event.
Plastics Gearing Committee Meeting
June 8-9, 2010 | Start time is 8:00 am and adjourning at 12:00 pm on June 9
Members of the Plastic Gearing Committee must register for this free event.
Photo by Ticona Engineering Polymers.
Powder Metallurgy Gearing Committee Meeting
June 10-11, 2010 | Start Time 8:30 am / Adjourn time on June 11 12:00 pm
Members of the Powder Metallurgy Gearing Committee must register to attend this free event.
Photo courtesy of Capstan Atlantic.
Energy Efficiency Committee Meeting
June 15, 2010 | 2:30 - 4:30 pm
Members of this group must register for this free event.
Bevel Gearing Committee Meeting
June 15, 2010 | 11:00 am - 1:00 pm
Members of the must register for this free event.
Photo by Commercial Gear & Sprocket Co., Inc.
Computer Programming Committee Meeting
June 16, 2010 | 3:00 - 4:30 pm
Members of this committee must register for this free event.
Photo by Schafer Gear Works
Cutting Tools Committee Meeting
June 17-18, 2010 | Start time: 9:00 am / Adjourn time: 1:00pm
Members of this committee must register for this free event.
Photo by Machine Tool Builders, Inc.
Enclosed Drives for Industrial Applications Committee Meeting
June 17, 2010 | 10:00 am - 11:30 am
Members of the Enclosed Drives for Industrial Applications Committee must register to attend this free event.
Vehicle Gearing Committee Meeting
June 22-23, 2010 | Start time is 9:00am, adjourning on June 23, 2010 at 4:30 pm
Members of the Vehicle Gearing Committee must register to attend this meeting.
Energy Efficiency Committee Meeting
June 22, 2010 | 2:30 pm - 4:30 pm EST
Members of this group must register for this free event.
Flexible Couplings Committee Meeting
June 29, 2010 | 10:00 - 11:00 am
Photo by Rexnord.
Members of the Flexible Couplings Committee must register for this free event.
Helical Enclosed High Speed Units Committee Meeting
June 29, 2010 | 10:00 - 11:00 am
Members of the Helical Enclosed High Speed Units Committee must register to attend this free event.
Computer Programming Committee Meeting
July 7, 2010 | 3:00 pm - 5:00 pm
Members of this committee must register for this free event.
Helical Enclosed Drives Marine Units Committee Meeting
July 14, 2010 | 9:00 a.m. - 12:00 p.m. EST
Members of this committee must register for this free event.
Metallurgy and Materials Committee Meeting
July 15, 2010 | 10:30 am - 12:30 pm
Members of this committee must register to attend this free event.
Energy Efficiency Committee Meeting
July 20, 2010 | 2:00 pm - 4:30 pm
Members of this committee must register for this free event.
Sound & Vibration Committee Meeting
July 20, 2010 | 10:00 am - 12:00 pm
Members of the Sound & Vibration Committee must register for this free teleconference.
Gear Accuracy Committee Meeting
July 21-22, 2010 | Start time 9:00am / Adjournment 5:00 pm
Members of the Gear Accuracy Committee must register for this free event.
Bevel Gearing Committee Meeting
August 2-3, 2010 | 9:30 am - 4:00 pm
Members of this committee must register for this free event.
Fine-Pitch Gearing Committee Meeting
August 5-6, 2010
Members of this committee must register for this free event.
Nomenclature Committee Meeting
August 5, 2010 | 11:00 - 11:30 am
Members of this committee must register to attend this meeting.
Mill Gearing Committee Meeting
August 10, 2010 | 9:30 am - 12:00 pm
Members of this committee must register for this free event.
Computer Programming Committee Meeting
August 11, 2010 | 3:00 - 4:30 pm
Members of the Computer Programming Committee must register for this free event.
Energy Efficiency Committee Meeting
August 17, 2010 | 2:00 - 4:30 pm
Members of the Energy Efficiency Committee must register for this free event.
Helical Enclosed Drives Marine Units Committee Meeting
August 17, 2010 | 9:00 am
Members of this committee must register for this free event.
Technical Division Executive Committee Meeting
August 24, 2010 | 10:00 - 11:00 am
Members of the TDEC must register for this free event
NEW Spline Committee - Introductory Meeting
September 1, 2010 | 10:00 - 11:30 am
This is a NEW committee. Attendance on this call is for Members Only.
