AGMA - American Gear Manufacturers Association

AGMA Releases FTM Technical Papers

AGMA has released the 19 technical papers presented at its 2009 Fall Technical Meeting.

For details or to purchase a paper, click on each paper’s ID or scroll down to download the Publications Catalog.

AGMA members enjoy discounts on these products. Learn more about AGMA membership or download the membership application.

To purchase all 19 papers as one set, please call AGMA at (703) 684-0211.

09FTM01 Influence of the Residual Stresses Induced by Hard Finishing Processes on the Running Behavior of Gears
Authors: V. Vasiliou, C. Gorgels and F. Klocke

09FTM02 Implementing ISO 18653, Evaluation of Instruments for the Measurement of Gears
Authors: R.C. Frazer and S.J. Wilson

09FTM03 Producing Profile and Lead Modifications in Threaded Wheel and Profile Grinding
Author: A. Türich

09FTM04 New Developments in Gear Hobbing
Author: O. Winkel

09FTM05 HYPOLOID Gears with Small Shaft Angles and Zero to Large Offsets
Author: H. Stadtfeld

09FTM06 Dependency of the Peak-to-Peak Transmission Error on the Type of Profile Correction and Transverse Contact Ratio of the Gear Pair
Author: U. Kissling

09FTM07 Optimizing Gear Geometry for Minimum Transmission Error, Mesh Friction Losses and Scuffing Risk
Authors: R.C. Frazer, B.A. Shaw, D. Palmer and M. Fish

09FTM08 Load Sharing Analysis of High Contact Ratio Spur Gears in Military Tracked Vehicle Application
Authors: M. Rameshkumar, P. Sivakumar, K. Gopinath and S. Sundaresh

09FTM09 Designing for Static and Dynamic Loading of a Gear Reducer Housing with FEA
Authors: M. Davis, Y. S. Mohammed, A.A. Elmustafa, P.F. Martin and C. Ritinski

09FTM10 The Effect of Flexible Components on the Durability, Whine, Rattle and Efficiency of a Transmission Geartrain System
Author: A. Korde and B.K. Wilson

09FTM11 Unique Design Constraints for Molded Plastic Transmissions
Authors: R. Kleiss and E. Wiita

09FTM12 The Anatomy of a Micropitting Induced Tooth Fracture Failure – Causation, Initiation, Progression and Prevention
Authors: R.J. Drago, R.J. Cunningham and S. Cymbala

09FTM13 Bending Fatigue, Impact Strength and Pitting Resistance of Ausformed Powder Metal Gears
Authors: N. Sonti, S. Rao and G. Anderson

09FTM14 Design Development and Application of New High – Performance Gear Steels
Authors: J.A. Wright, J.T. Sebastian, C.P. Kern and R.J. Kooy

09FTM15 High Performance Industrial Gear Lubricants for Optimal Reliability
Authors: K.G. McKenna, J. Carey, N.Y. Leon and A.S. Galiano-Roth

09FTM16 Allowable Contact Stresses of Jacking Gear Units Used in the Offshore Industry
Author: A. Montestruc

09FTM17 Variation Analysis of Tooth Engagement and Load-Sharing in Involute Splines
Authors: K. Chase, C. Sorenson and B. DeCaires

09FTM18 Does the Type of Gear Action Affect the Appearance of Micro-Pitting and Gear Life?
Authors: A. Williston

09FTM19 The Effect of Gearbox Architecture on Wind Turbine Enclosure Size
Author: C.D. Schultz

Download Link: Publications Catalog